Principle Of Metal Cable Waterproof Joint
Jun 09, 2024
The principle of metal cable waterproof joints is to use special materials and structural design, use waterproof glue and sealing components to fix the wires and cables inside the joints, forming a good sealing effect. Even in damp or flooded conditions, it can effectively prevent moisture from penetrating into the inside of the wires, ensuring the normal operation of electrical equipment.
The design of metal cable waterproof joints includes key components such as fixing blocks, locking holes, through holes, and locking blocks. The locking hole is a trapezoidal structure, and the surface area of the slot near the locking block is smaller than that far away from the locking block. On the side of the fixed block close to the locking block, there are several equidistant pressure plates distributed around the locking hole slot. These pressure plates have a circular arc structure with the same center position. The outer wall of the pressure plate is provided with a first thread, and the inner wall of the through-hole near the circumference of the pressure plate is provided with a second thread that is compatible with the first thread. This design allows the inner wall of the through-hole to match the outer wall of the pressure plate, thereby achieving good wrapping and waterproofing of the cable joint, achieving the effect of waterproofing and protecting the cable joint.







