Call Us: +86-0574-88652866Email: attain@nbattain.com
enLanguage

Waterproof Treatment Steps For Intermediate Joints Of Low-voltage Cables

Jun 03, 2024

(1) After crimping the terminals, wrap waterproof filling glue around the terminals. Shrink heat shrink tubing.
(2) If it is a generally slightly humid environment, wrap waterproof filling tape around both ends of the cable and shrink the protective sleeve (the protective sleeve must have adhesive on both ends).
(3) If the environment is harsh, self-adhesive waterproof tape must be used to strengthen waterproofing (heat shrink waterproof tape can also be used, we usually use self-adhesive tape, and heat shrink tape is used for repairing cable damage). The method is:
A, After filling the waterproof filling adhesive, wrap a layer of self-adhesive waterproof tape on the outer layer of the filling adhesive or stretch the self-adhesive waterproof tape to wrap multiple layers, but the thickness should not be too thick, so as not to be too large and cause the insulation pipe to not fit in.
B, Wrap the heat shrink tubing over the adhesive and shrink it well.
C, Wrap waterproof tape around both ends of the heat shrink tube, then wrap another layer of self-adhesive waterproof tape. Wrap waterproof tape and self-adhesive tape around both ends of the cable insulation sheath, and then heat the sheath to shrink it.